If your sink is clogged, it is likely that you will need to learn how to fix a clogged sink and drain. Most of the time, clogs are caused by hair, food particles, or dried-out skin cells. Sometimes, a clogged sink drain is caused by an inlet that is dirty, plugged, or has backed up. Here are some tips to help you determine the problem and how to fix a clogged sink and drain:

How to fix a clogged bathroom sink drain If your sink is plugged, you have to first try to discover the exact cause of the blockage before you can fix a clogged sink. In order to eliminate the blockage, you have to open the bathroom sink drain pipe on both sides and use a basin wrench. Then, you should bend the drain’s pipe joint to turn it off and on. This will separate the inside part of the drain pipe from the p-trap (the trap that causes the clog).

How to fix a clogged kitchen sink and drain It is also possible that your drainpipes are obstructed with fecal matter such as stringy protein or mucous.  If this is the case, you may be better off hiring a professional plumber to clean your drains.

To fix a clogged kitchen sink, you can first turn on the faucet in the sink and let it run until it clears up the sink drain. You may also need to increase the water flow rate in your dishwasher or washing machine to increase the flow rate of the drainpipes. After this, you should clean the drain by scrubbing it with a sponge or a wire brush. You may also need to add some household bleach or ammonia to help remove the stubborn stain.

How to fix a clogged sink and drain In most cases, clogs are caused by trapped solid matter such as hair, debris, food particles, etc. A toilet bowl clog is a common problem because the waste materials gradually build up in the bowl. To fix a clog in the bathroom sink, you can use a plunger or a toilet brush. These devices will force the clog out of the drain pipes.

Clogs in sink drains can also be caused by loose or broken sink traps. To solve this kind of clog, you should first check if the sink traps have come loose. You can replace the sink traps by using pliers. If you find the sink traps difficult to remove, you can use the wrench instead of pliers. Just make sure that you place the wrench in the correct hole.  Better yet, this task may be better suited for a 24 Hour plumber in Columbus, OH.

To break a clogged drain, you need to apply pressure on both sides of the sink and then pull them out from the sink. There are different methods to apply pressure. You can use the water hose that usually comes with the sink. In this case, you will not have to go outside. You can use your garden hose as well if you have one.

However, if you have drainpipes coming from all directions, including the bathroom sink, you will need to use a wrench. Start by loosening all the clogged pipe connections. Then use the drainpipes bursting valve to open the clogged drainpipes. Remove the pipe from the sink trap, disconnect the plumbing line from the sink, and lift the sink out of the drain. Put the sink back and reconnect the plumbing.

Clogging in sink traps can also be caused by the build-up of grease and grime. To clean the clog in these kinds of clogs, you can use a soft brush. This is helpful to remove the hardened dirt and grease that cause the clog in the sink. Use the brush in a circular motion. You should be careful not to burn yourself with the bristles of the brush. When the clog is partially removed, fill it with some water and drain it away.